Details on this package are located in Section 10.58.3, “Contents of Sysvinit.”
The Sysvinit package contains programs for controlling the startup, running, and shutdown of the system.
The following modifications help locate files specific to this perticular build:
cp -v src/Makefile{,.orig} sed -e 's,/usr/lib,/tools/lib,g' \ src/Makefile.orig > src/Makefile
Compile the package:
make -C src clobber make -C src CC="${CC}"
Install the package:
make -C src ROOT=${CLFS} install
Create a new file ${CLFS}/etc/inittab
by running the
following:
cat > ${CLFS}/etc/inittab << "EOF"
# Begin /etc/inittab
id:3:initdefault:
si::sysinit:/etc/rc.d/init.d/rc sysinit
l0:0:wait:/etc/rc.d/init.d/rc 0
l1:S1:wait:/etc/rc.d/init.d/rc 1
l2:2:wait:/etc/rc.d/init.d/rc 2
l3:3:wait:/etc/rc.d/init.d/rc 3
l4:4:wait:/etc/rc.d/init.d/rc 4
l5:5:wait:/etc/rc.d/init.d/rc 5
l6:6:wait:/etc/rc.d/init.d/rc 6
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
su:S016:once:/sbin/sulogin
EOF
The following command adds the standard virtual terminals to
${CLFS}/etc/inittab
. If your system only has a serial
console skip the following command:
cat >> ${CLFS}/etc/inittab << "EOF"
1:2345:respawn:/sbin/agetty -I '\033(K' tty1 9600
2:2345:respawn:/sbin/agetty -I '\033(K' tty2 9600
3:2345:respawn:/sbin/agetty -I '\033(K' tty3 9600
4:2345:respawn:/sbin/agetty -I '\033(K' tty4 9600
5:2345:respawn:/sbin/agetty -I '\033(K' tty5 9600
6:2345:respawn:/sbin/agetty -I '\033(K' tty6 9600
EOF
If your system has a serial console, run the following command to add
the entry to ${CLFS}/etc/inittab
.
cat >> ${CLFS}/etc/inittab << "EOF"
c0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100
EOF
Finally, add the end line to ${CLFS}/etc/inittab
.
cat >> ${CLFS}/etc/inittab << "EOF"
# End /etc/inittab
EOF
Details on this package are located in Section 10.58.3, “Contents of Sysvinit.”